Motor control module provides control of up to 4 bidirectional motors for drapes, blinds, projection screens, lifts. Each channel is rated for 8A or 1 HP, with total module rating of 1A. It occupies single module space in any CAEN or CAENIB automation enclosure. Termination of high-voltage wiring to module is facilitated by CLTI-1MC4 terminal block, sold separately to enable termination of wiring anytime prior to installing module. CLXI modules are controlled by the PAC2 and PAC2M professional automation control systems via Cresnet network. 5-wire link provides bussing of Cresnet and override signals between modules within an enclosure (interconnect jumpers included).
Button setup is used for manual channel activation and TSID
Green LED indicators indicates line power is applied to LINE terminal
Yellow LED indicators indicates communication with control system
Red x4 LED indicators indicates state of each channel
Red LED indicators indicates unit is in setup/manual mode
Spec Sheet available - Yes
Load Rating Motor Control Channels:
4
Load Rating Per Channel:
8 A (1 HP)
Load Rating Module Total:
13 A
Load Types:
3-Wire Bidirectional Motors
Line Connections via CLTI or CLTIBN:
(1) DIN rail terminal block, brown, line power input
DIM Connections via CLTI or CLTIBN:
(4) DIN rail terminal blocks, red, channel outputs
Neutral Input Connections via CLTI or CLTIBN:
(1) DIN rail terminal block, blue, line input neutral
Neutral Output Connections via CLTI or CLTIBN:
(4) DIN rail terminal blocks, blue, channel output neutrals
Power Requirements:
230Vac, 50/60Hz, single-phase
Heat Dissipation:
21 BTU/hr (Maximum load)
Operating Temperature (Maximum):
104 F
Operating Temperature (Minimum):
32 F
Depth:
3.43 in
Height:
7.59 in
Width:
6.92 in
Product Weight:
3 lbs
AC Voltage:
230 Volts
CLX-1MC4
- 4-channel 120V Motor Control Module, 1 Feed
