The CP560 DVB-T2 Gateway provides a central point of control for DVB-T2 networks, enabling the operator to take advantage of the more efficient spectrum utilization promised by the next generation terrestrial broadcasting technology. The CP560 utilizes the advanced processing capabilities of the cProcessor family to adapt the transport stream into the DVB-T2 Modulator Interface format. The CP560 also enables the DVB-T2 Modulator Interface to control the modulator parameters and provides the accurate timing and rate control required for SFN (single frequency network) operation. The CP560 is part of T-VIPS’ cProcessor product family, a line of compact and powerful and cost-effective, products designed for advanced processing and handling of MPEG transport streams. The CP560 provides flexible interfacing with ASI or IP inputs, and DVB-T2 MI outputs over ASI and IP.
DVB-T2 MI interface to the DVB-T2 and DVB-T2Lite modulators
Single and multiple PLP operation
Seamless SFN/MFN T2 switching between units in 1+1 configuration
ASI and IP input/output interfaces with redundancy
User-friendly configuration and control
Compact, cost-effective solutions with 2 units in 1RU
Efficiency increase of up to 50% compared to DVB-T
Central point of control for DVB-T2 networks
Higher signal robustness compared to DVB-T
Better frequency usage with SFN
Applicable for DVB-T2 preprocessing, DVB-T2 Lite networks
Spec Sheet available - Yes
Operating Temperature (Maximum):
122 F
Operating Temperature (Minimum):
32 F
Rack Units (Height):
1
AC Voltage (Maximum):
240 Volts
AC Voltage (Minimum):
100 Volts
DC Voltage:
-48 Volts
Depth:
11.81 in
Height:
1.75 in
Width:
8.27 in
Regulatory Compliance:
CE, CSA, EMC
SFN Operation:
DVB-T2 time stamps insertion, DVB-T2 MIP insertion
Bandwidth Support:
1,7, 5, 6, 7, 8, 10 MHz
Clock Reference:
1PPS Input (50 Ohm female BNC)
UTC Time Reference:
SNTP over the management interface (RJ45)
