Repeater When installing the Repeater device in the middle of a link, it will allow to double the total distance. (e.g. Cat X up to 2x140 m =280 m). Under all other circumstances, the cable on each side of the Repeater/Cross- Repeater may have the usual maximum distance (e.g. Cat X up to 140 m, Multimode 50µ up to 400 m, ...). Cross Repeater When installing a Cross- Repeater device, the cable on each side of the Repeater/ Cross- Repeater may have the usual maximum distance (e.g. Cat X up to 140 m, multi-mode 50µ up to 400 m, ...). Attention! Actually DVXi Cat X and fiber devices must not be used assorted. This means, it’s not allowed, to connect a DVXi Cat X Local Unit with a DVXi Fiber Remote Unit. So actually Cross- Repeater can be used only in pairs. Application In many large buildings the horizontal cabling is done with Cat X cables and the vertical cabling with fiber cables. If you use Cross Repeaters, this application will be handled perfectly. The Cross Repeater is also very suitable for the connection between two buildings.