HD up/down/cross converter is a flexible and configurable for use in broadcast and post. It can process SD (Standard Definition) signals into HD, downconvert HD signals into standard definition, and perform Format and Aspect Ratio Conversion on both SD and HD signals. The 7900 and the optional 8415 audio sub module together only occupy one slot in an Avenue frame - now that's efficient use of space.
Upconverter
Downconverter
Cross converter
Aspect Ratio Converter
Smart auto-config, set output, then feed any input
Proc Amp and Frame Sync
Audio Mux/Demux optional
Audio Automatic Gain Control optional
Add audio sub module option for delay and processing
All internal processing performed on 4:4:4 progressive signals
Accepts asynchronous signals
Reference input, output is timeable
Automatically adjusts between SD/HD color space and gamma
16 bit processing
Edge and motion adaptive noise reduction
Picture detail enhancement
Anti-Alias filter
Passes closed captioning
Auto detection of input standard and frame rate
3:2 pulldown
Built-in test pattern and tone
Local and remote control
Converter Signal Types - Audio
Converter Signal Types - Video
Converter Type - Aspect Ratio Converter
Converter Type - Cross Converter
Converter Type - Up/Down Converter
Warranty - Yes
Spec Sheet available - Yes
Operating Temperature (Maximum):
104 F
Operating Temperature (Minimum):
32 F
Input Signal Types:
HD/SMPTE 274M, 292M or 296M/SD
Number of Channels:
8
Output (Converted) Signal Type:
SMPTE 274M, 292M or 296M/SMPTE 259M
Warranty (Length/Type):
5 years
Impedance:
75 ohms
Digital Input Return Loss:
>15 dB
Power Consumption:
10 W
Relative Humidity:
0 to 95 % (noncondensing)
Altitude:
0 to 10,000 ft
Bit Resolution:
12 bit input quantization, 4x oversampling
Signal to Noise:
>65 dB
Frequency Response:
0 to 5.5 MHz (±0.1 dB)
Crosstalk:
<144 dB
Dynamic Range:
>144 dB
Sample Rate:
30 to 100 kHz (sample rate converted internally to 48 kHz)
