The PT-RW430 is a 3500 Lumens WXGA 1-chip DLP solid shine laser fixed installation projector ideal for use in education, corporate or digital signage applications.
Digital link connectivity
20,000:1 contrast ratio
LED/Laser light source enables up to 20,000 hours of maintenance free usage
System expandability with portrait mode installation capability and edge blending
Aspect Ratio - 16:10
HDBaseT - Yes
Number of Imagers - 3-chip
Projector Applications - Corporate
Projector Applications - Digital Signage
Projector Applications - Education
Projector Technology Type - DLP
Supported Resolution - WXGA (1280x800)
Operating Temperature (Maximum):
113 F
Operating Temperature (Minimum):
32 F
Brightness Full:
3500 lumens
Communication Formats:
RS232C
Communication Ports:
RS232
Contrast Ratio:
20000
Lamp Type:
Laser
Lens Type:
Manual Focus and Zoom
AC Voltage (Maximum):
240 Volts
AC Voltage (Minimum):
100 Volts
Depth:
16.34 in
Height:
5.39 in
Width:
17.91 in
Product Weight:
24.25 lbs
Power Consumption:
460 W (470 VA) (250 W with LIGHT POWER set to NORMAL, 200 W with LIGHT POWER set to Ecosave1, 178 W with LIGHT POWER set to Ecosave2. 0.5 W with STANDBY MODE set to ECO, 8 W with STANDBY MODE set to NORMAL)
Terminals HDMI IN:
HDMI 19-pin x 1, HDCP compatible, Deep Color compatible; 480p(525p), 576p(625p), 720(750)/60p, 720(750)/50p, 1080(1125)/60i, 1080(1125)/50i, 1080(1125)/25p, 1080(1125)/24p, 1080(1125)/24sF, 1080(1125)/30p, 1080(1125)/60p, 1080(1125)/50p, VGA(640 x 480) - WUXGA(1,920 x 1,200), compatible with non-interlaced signals only, dot clock: 25-162 MHz, audio signal: linear PCM (sampling frequencies: 48 kHz, 44.1 kHz, 32 kHz)
Terminals DVI-I IN:
DVI-I 29-pin x 1
Terminals DVI-I IN Digital:
DVI 1.0 compliant, HDCP compatible, for single link only; 480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/24p,1080/24sF, 1080/25p, 1080/30p, 1080/60p, 1080/50p, VGA(640 x 480) - WUXGA(1,920 x 1,200), compatible with non-interlaced signals only, dot clock: 25-162MHz
Terminals DVI-I IN RGB:
R: 0.7 Vp-p, 75 ohms; G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms; B: 0.7 Vp-p, 75 ohms; HD/VD, SYNC: TTL, high impedance, positive/negative automatic; NOTE: HD/SYNC, and VD terminals do not accept tri-level sync signals.
Terminals SERIAL IN:
D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
Terminals LAN/DIGITAL LINK:
RJ-45 x 1 for network and DIGITAL LINK (video/audio/network/serial control) connection, 100Base-TX, compatible with PJLink™, HDCP compatible, Deep Color compatible, 480p(525p), 576p(625p), 720(750)/60p, 720(750)/50p, 1080(1125)/60i, 1080(1125)/50i, 1080(1125)/25p, 1080(1125)/24p, 1080(1125)/24sF, 1080(1125)/30p, 1080(1125)/60p, 1080(1125)/50p, VGA(640 x 480) - WUXGA(1,920 x 1,200), compatible with non-interlaced signals only, dot clock: 25-162 MHz
Terminals 3D SYNC OUT:
Mini DIN 3-pin x 1, for 3D transmitter connection
