The USB-P helps to run stereo audio from a computer into a sound system. Connecting a computer to a sound system is often a challenge. Ground loops are often a problem when connecting computer audio to a sound system. The problem gets worse if there is a projector connected to the computer. The USB-P works well whether the computer is located near the console or on stage. As the name implies, the USB-P connects to the USB port of the computer and appears as a stereo output device. Depending on your computer operating system, you may need to select the USB audio device for output on the program you are using. The dual transformers in the USB-P provide the balanced outputs and ground isolation required when interfacing a computer to a sound system.
Standard USB audio device
Transformer isolation
Ground lifted balanced outputs
Playback only
USB powered
Stereo/Mono output switch
Spec Sheet available - Yes
Depth:
4 in
Height:
1.60 in
Width:
4 in
Product Weight:
0.64 lbs
Shipping Weight:
0.44 lbs
Frequency Response:
20Hz to 20kHz (+-1dB )
THD + Noise:
<0.015 % (at 1kHz, -9dBu full scale output into 10 kiloohms)
Hum and Noise:
<89 dB (below full scale output )
Output Level:
–9 dBu (Full scale into 10 kiloohms Line input )
Output Level:
-13 dBu (Full scale into 2 kiloohms Mic input)
