The 12VAC Brick™ is designed to function properly with an input power of 11-13VAC. The Brick will not operate from a DC voltage. A 2.1 mm P5 style connector is used for the power input. If
the input voltage is a grounded system, the center pin of the P5 is the power connection and the barrel is the ground side. All ProSeries units are shipped with a 12VAC, 600mA floating power supply that eliminates any ground loops through the power supply connection.
Unbalanced mono audio distribution amplifier
Loop-thru input
Individual variable gain
Terminal block connectors
12VAC with P5 power connector
DA Audio Input - Other
DA Audio Output - Other
Warranty - Yes
Spec Sheet available - Yes
Spec Sheet available - Yes
Operating Temperature (Maximum):
122 F
Operating Temperature (Minimum):
-40 F
Mount Type:
Threaded inserts
Number of Inputs:
1
Number of Outputs:
4
AC Voltage (Maximum):
13 Volts
AC Voltage (Minimum):
11 Volts
Current Draw:
0.10 Amps
Shipping Weight:
2 lbs
Warranty (Length/Type):
2 Years
Frequency Response:
DC to 100 kHz @ -3.0 dB
Input Signal Level:
0 to 8.0 Vpp (within -4V to +4V range from ground)
Input Impedance:
>5 kohms
Input Coupling:
DC
Gain:
Individual Variable Gain 0.5X - 4.0X
Output Impedance:
100 ohm
Operating Humidity:
0 to 95 %
Package:
Solid epoxy block
Package Dimension:
2.2 x 4.4 x 0.65 inch not including connectors
