Catalog

Home » Catalog

Pro AV Catalog

Speakers : Loudspeakers : Bogen Communications, Inc. - 106-0850

All Products

AFI-8B Black Biamp Wide Angle Loudspeaker

Model: 106-0850

Driver Complement: Low-Frequency: One Apogee 15 inch (381mm) neodymium magnet cone-type driver is treated with a waterproofing compound, providing resistance to moisture, and enabling long-term stability of cone resonance and cone mass parameters
Also treated with Ferrofluid® for greater power handling capability, lower distortion, and control of short-term impedance rise
High-Frequency: One Apogee 3 inch (76mm) voice coil, 2 inch(51mm) exit horn-loaded compression driver treated with Ferrofluid® for greater power handling capability, lower distortion, and control of short term impedance rise
Input Connectors: Barrier strip, screw type #8
Compatible Processors: AFI Main Frame Controller Chassis (using either AFI-8/-8B/-8W/- 8WB Modules) or DLC24

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The AFI-8 is a fully arrayable loudspeaker capable of filling large churches, theaters, sports venues, and theme parks with clean, articulate full bandwidth sound. Available with a 60° x 40° or 90° x 40° high-frequency horn pattern insuring that the AFI-8 works flawlessly in any room configuration. A bi-amplified version is also available.

Driver Complement: Low-Frequency: One Apogee 15 inch (381mm) neodymium magnet cone-type driver is treated with a waterproofing compound, providing resistance to moisture, and enabling long-term stability of cone resonance and cone mass parameters
Also treated with Ferrofluid® for greater power handling capability, lower distortion, and control of short-term impedance rise
High-Frequency: One Apogee 3 inch (76mm) voice coil, 2 inch(51mm) exit horn-loaded compression driver treated with Ferrofluid® for greater power handling capability, lower distortion, and control of short term impedance rise
Input Connectors: Barrier strip, screw type #8
Compatible Processors: AFI Main Frame Controller Chassis (using either AFI-8/-8B/-8W/- 8WB Modules) or DLC24
Recommended Crossover (AFI-8B only): Contact Apogee for full technical data on other DSP-based Processors
Handles: Two handles – one top, one bottom – designed as an integral part of the enclosure (no moving parts) Grille: Highly durable, quality finish on perforated steel (aluminum on SX version)
Rigging Hardware: Fourteen rigging points, four each on top and bottom, two each on both sides and rear, all backed with 16-gauge steel; points can be type 3/8 inch-16 or M10 thread
Finish: Textured high-strength black or white epoxy paint; other colors optional
Enclosure Type: 30° trapezoidal, optimally-vented bass
Cabinet Construction: Multi-ply hardwood
Options/Accessories: AFI Controller Processor or DLC24 Digital Processor; SX weather treatment for use in limited exposure enclosures ; assorted rigging components

Loudspeaker Setup - Rigged
Powered (Active) - Yes
Spec Sheet available - Yes

Depth: 15.10 in
Finish: Textured high-strength black or white epoxy paint; other colors optional
Format: Bi-amped/Two-way
Height: 30.25 in
Impedance: 8 ohm
Input Connectors: Barrier strip, screw type #8
Width: 20.25 in
Enclosure Type: 30° trapezoidal, optimally-vented bass
Grille: Highly durable, quality finish on perforated steel (aluminum on SX version)
Handles: Two handles – one top, one bottom – designed as an integral part of the enclosure (no moving parts)
Maximum SPL (Sound Pressure Level): 131 dB
Cabinet Construction: Multi-ply hardwood
Product Weight: 77 lbs
Coverage Horizontal: 60 degrees
Coverage Vertical: 40 degrees
Color: Black
Construction: Hardwood
Minimum Frequency Response (Bandwidth): 46 Hz
Minimum Frequency Response (Bandwidth): 0.05 kHz
Maximum Frequency Response (Bandwidth): 20000 Hz
Maximum Frequency Response (Bandwidth): 20 kHz
Finish: Textured
Speaker Diameter (Driver): 15 in
Sensitivity (High Frequency): 104 dB
Sensitivity (Low Frequency): 99 dB
Power Handling (High Frequency): 1600 Watt
Power Handling (Low Frequency): 400 Watt
Compatible Processors: AFI Main Frame Controller Chassis (using AFI-4 Module) or DLC24
Rigging Hardware: Fourteen rigging points, four each on top and bottom, two each on both sides and rear, all backed with 16-gauge steel; points can be type 3/8 inch-16 or M10 thread
PTML (peak transient mechanical limit): 141 dB

Loudspeaker 433150 kb - Data Sheet

Project List

Emerald Terms | | Powered by AV-iQ

Ready to elevate your experience? Let us help.

From government facilities to houses of worship, your organization relies on digital technology and its necessary updates. Connect with us today at DRI for expertly integrated digital systems – no strings attached.

Name*

Email*

Phone

What are you contacting us about today?*

How can we help?