The 7707SVTDxxx-2 is a VistaLINK® capable S-Video fiber transmitter for broadcast quality signals. This single card module accepts two S-Video inputs, performs analog to digital conversion and transmits them over a single fiber. The companion 7707SVR-2 S-Video Fiber Receiver demultiplexes the signals and converts them back to analog form.The fiber output of the 7707SVT-2 is available in an assortment of optical wavelengths accomodating 1310nm/1550nm, CWDM and DWDM transmission schemes. The 7707SVT-2 occupies one card slot and can be housed in the 1RU 7801FR frame which holds up to four single or two dual slot modules, the 3RU 7800FR frame which has a 15 slot capacity, the portable 3RU 350FR frame which has a 7 slot capacity, or a standalone enclosure which holds a single module.
Single card fiber multiplexor for up to two S-Video signals
Supports both NTSC and PAL
Broadcast quality analog video performance
Meets or exceeds EIA/TIA RS250-C short haul specifications for analog video transport
Superior digital data transmission
Signal transport over fiber uninterrupted by loss of input video feeds
Comprehensive Signal and card status monitoring via four-digit card-edge display, or remotely through SNMP and VistaLINK® capability
Fully hot-swappable from front of frame with no fiber disconnect/reconnect required
Supports single mode and multi-mode fiber optic cable
Optical output wavelengths at 1310nm, 1550nm, and up to sixteen CWDM wavelengths (ITU-T G.694.2 compliant)
DWDM wavelengths (ITU-T G.694.1 compliant) also available
Fiber Optic Connector Type - Other
Fiber Optic Signals Supported - Other
Spec Sheet available - Yes
Signal to Noise Ratio:
70 dB
Active Power:
0.92 Watt
DC Voltage:
12 Volts
Regulatory Compliance:
Class 1 laser product, Complies with 24CFR 1040.10 and 1040.11 IEC 60825-1,Complies with FCC Part 15 Class A, EU EMC Directive
Analog S-Video Input Standards:
NTSC, SMPTE ST 170, PAL, ITU-R 624-4
Analog S-Video Number of Inputs:
2
Analog S-Video Input Connector:
IEC 933-5 (4-pin mini-DIN)
