These SDI with 4 analog audio fiber transmitter supports 525 or 625 line 4:2:2 component SDI signals and signal transport over fiber uninterrupted by loss of SDI or analog audio input feeds.
SDI video and 4 broadcast quality analog audio fiber optic transmitter
Supports 525 or 625 line 4:2:2 component SDI signals
Analog audio inputs can be synchronous or asynchronous to each other and/or to input video
Reclocked SDI output for additional signal distribution or monitoring
Signal transport over fiber uninterrupted by loss of SDI or Analog audio input feeds
Low Audio to Video latency over transport interface
Local display of input SDI signal strength, video format, and EDH errors
Automatic coaxial input equalization to 300m at 270Mb/s (Belden 8281)
Comprehensive signal and card status monitoring via four-digit card-edge display, or remotely through SNMP and VistaLINK® capability
Fully Hot-swappable from front of frame with no fiber disconnect/reconnect required
Supports single-mode and multi-mode fiber optic cable
Optical output wavelengths of 1310nm, 1550nm, and up to sixteen CWDM wavelengths (ITU-T G.694.2 compliant)
DWDM wavelengths (ITU-T G.694.1 compliant) also available
VistaLINK® capable for remote monitoring via SNMP (using VistaLINK® PRO) when installed in 7800FR frame with a 7700FC VistaLINK® Frame Controller
Occupies one card slot and can be housed in the 1RU 7801FR frame which holds up to four single or two dual slot modules, the 3RU 7800FR frame which has a 15 slot capacity, the portable 3RU 350FR frame which has a 7 slot capacity, or a standalone enclosure
Fiber Optic Signals Supported - Audio
Fiber Optic Signals Supported - Other
Spec Sheet available - Yes
Serial Video Input - Standard:
SMPTE ST 259-C
Serial Video - Number of Inputs:
1
Serial Video Input - Connector:
BNC per IEC 61169-8 Annex A
Serial Video Input - Equalization:
Automatic to 300m @ 270Mb/s with Belden 1694 or equivalent cable
Serial Video Input - Return Loss:
> 15dB up to 270Mb/s
Serial Video Output - Standard:
SMPTE ST 259-C
Serial Video - Number of Outputs:
1 reclocked
Serial Video Output - Connector:
BNC per IEC 61169-8 Annex A
Serial Video Output - Signal Level:
800 mV nominal
Serial Video Output - DC offset:
0V ±0.5V
Serial Video Output - Rise/Fall Time:
900 ps nominal
Serial Video Output - Overshoot:
< 10% of amplitude
Serial Video Output - Return Loss:
> 15dB up to 270Mb/s
Serial Video Output - Wideband Jitter:
< 0.2UI
Analog Audio Input - Type:
Balanced Analog Audio
Analog Audio - Number of Inputs:
4
Analog Audio Input - Connector:
12 pin removable terminal block
Analog Audio Input - Impedance:
High impedance (> 20kOhms)
Analog Audio Input - Frequency response:
±0.1dB, 20Hz to 20kHz
Analog Audio Input - THD:
< 0.005%, 20Hz to 20kHz
Analog Audio Input - Channel Phase Differential:
±1 °
Analog Audio Input - Weighted SNR:
> 85 dB
Analog Audio Input - Maximum input level:
+24 dBu
Analog Audio Input - Signal Quantization:
24 bits
Optical - Number of Outputs:
1
Optical Output - Connector:
Female SC/PC, ST/PC or FC/PC
Optical Output - Return Loss:
> 14 dB
Optical Output - Rise/Fall Time:
200 ps nominal
Optical Output - Wavelength:
1550 Nm
Optical Output - Power:
0 dBm ±1dBm
Number of Slots:
1
Active Power:
11 Watt
DC Voltage:
12 Volts
Regulatory Compliance:
FCC Part 15 Class A, EU EMC Directive
7707VAT13-A4
- SDI with 4 Analog Audio Fiber Transmitter, 1310nm FP Laser
7707VATDxxx-A4
- SDI with 4 Analog Audio Fiber Transmitter, DWDM DFB laser
7707VATxx-A4
- SDI with 4 Analog Audio Fiber Transmitter, CWDM DFB laser
