This triple HD/SDI/ASI/SDTi + ethernet SONET/SDH fiber transceiver transports signals at the OC-48/STM-16 rate. It interfaces directly to the SONET/SDH infrastructure.
Transports signals at the OC-48/STM-16 rate
Single card TDM multiplexer for three bi-directional asynchronous HD-SDI, SDI, DVB-ASI & SDTi signals
Built-in Ethernet transceiver with 10/100/1000 Base-T compatible port with FBM (Flexible Bandwidth Management) technology
Interfaces directly to the SONET/SDH infrastructure
Signal transport over fiber uninterrupted by loss of any input feed
Transparently passes embedded AES or any other data in the horizontal or vertical ancillary data space
Stratum 3 wander/holdover/jitter compliance
Wide input frequency range tolerance (±50ppm)
Fully hot-swappable from front of frame
Supports single-mode and multi-mode fiber optic cable
Optical output wavelengths of 1310nm, 1550nm, and up to sixteen CWDM wavelengths (ITU-T G.694.2 compliant)
DWDM wavelengths (ITU-T G.694.1 compliant) also available
SC/PC, ST/PC, FC/PC connector options
Comprehensive signal and card status monitoring via four digit card edge display or remotely through SNMP and VistaLINK®
VistaLINK® capable for remote monitoring via SNMP (using VistaLINK® PRO) when installed in 7800FR frame with a 7700FC VistaLINK® Frame Controller
Occupies two card slots and can be housed in the 3RU 7800FR frame which has a 15 slot capacity, or the portable 3RU 350FR frame which has a 7 slot capacity
Fiber Optic Signals Supported - Other
Spec Sheet available - Yes
Serial Video - Number of Inputs:
3
Serial Video Input - Standards:
Input 1: SMPTE ST 292-1, SMPTE ST 259-C, DVB-ASI, SMPTE ST 305 (SDTi); Inputs 2 and 3: SMPTE ST 259-C, DVB-ASI, SMPTE ST 305 (SDTi)
Serial Video Input - Connector:
BNC per IEC 61169-8 Annex A
Serial Video Input - Equalization:
Automatic to 100m @ 1.485Gb/s and 250m @ 270Mb/s with Belden 8281 or equivalent cable
Serial Video Input - Return Loss:
> 15dB up to 1.5Gb/s
Serial Video Input - Frequency Offset Tolerance:
±50 ppm
Serial Video - Number of Outputs:
3 +2 monitor with user selectable source
Serial Video Outputs - Standards:
Output 1 and Monitor 1 and 2: SMPTE ST 292-1, SMPTE ST 259-C, DVB-ASI, SMPTE ST 305 (SDTi); Output 2 & 3: SMPTE ST 259-C, DVB-ASI, SMPTE ST 305 (SDTi)
Serial Video Outputs - Connector:
BNC per IEC 61169-8 Annex A
Serial Video Outputs - Signal Level:
800 mV nominal
Serial Video Outputs - DC Offset:
0V ±0.5V
Serial Video Outputs - Rise and Fall Time:
150ps nominal @ 1.485Gb/s, 600ps nominal @ 270Mb/s
Serial Video Outputs - Overshoot:
< 10% of amplitude
Serial Video Outputs - Return Loss:
> 15dB up to 1.5Gb/s
Serial Video Outputs - Alignment Jitter:
< 0.2 UI
Number of Slots:
2
Active Power:
25 Watt
DC Voltage:
12 Volts
Regulatory Compliance:
FCC Part 15 Class A, EU EMC Directive
