HDMI-TPS-TX86 twisted pair HDBaseT extenders provide extension of uncompressed Full-HD video for long distances over a single CATx cable. The unit offers bi-directional RS-232, IR pass-through on the same CATx cable that carries the video signal. The TPS extenders support full HDCP and EDID compliance and work at all standard AV resolutions up to 4K and 48-bit color depth handling all standard audio formats and also 120 Hz 3D signals. Remote
powering is available through a single CATx cable, but a local power supply can also be used. All devices can be mounted on a rack shelf or used standalone. The Auto operation mode allows the device to detect the far end extender’s mode and adopt it. If the far end device is in Auto mode or it is a third party HDBaseTTM device the link will be set to HDBT mode. If the far device is in forced Long Reach Mode then the auto operation will set the Link
to Long Reach Mode.
Can be remote powered through CATx cable (12V)
Supports HDMI 3D signal formats (frame packing, side-by-side and top-bottom)
Supports deep color signals (24/30/36 bit RGB/YCbCr 4:4:4)
1920x1080@120Hz/4:4:4, 4096x2048@30Hz/4:4:4 or 60Hz/4:2:0 maximum resolutions (300MHz)
Supports all VESA and HDTV resolutions
HDMI 1.4, HDCP 1.4 and DVI 1.0 compliant
Bi-directional RS-232 extension (pass-through)
HDCP 2.2 compliant (transparent pass-through)
Compatible with 120 Hz 3D video signals
Uncompressed video up to 9 Gbps datarate (300 MHz pixel clock)
No signal latency, zero frame delay
Extends DVI or HDMI 1.4 + RS-232 + IR over one CAT5/6/7 cable
Cross compatible with TPS series Lightware extenders and I/O boards (HDBaseT compatible)
Supports all embedded audio formats (including PCM, Dolby Digital and DTS high bitrate audio)
Extension distance up to 170 meters (with CAT7 S/FTP AWG23 cable, 1920x1080p60)
HDBaseT compatible
Transparent EDID pass-through
Bi-directional IR extension (pass-through)
CEC support (pass-through)
Supports HDMI 4K signal formats (4K UHD @30Hz RGB 4:4:4 or @60Hz YUV 4:2:0, up to 9 Gbps)
No video compression
Status LEDs (Live, TPS link, signal and HDCP detect)
Twist-and-lock DC power connector
Low power mode (standby)
Local or remote (remote-send / remote-receive) power source
External universal power adaptor
Mounting options for rack, furniture or truss
HDBaseT - Yes
Receiver/Transmitter Cable Type - HDMI
Receiver/Transmitter Cable Type - Twisted Pair
Receiver/Transmitter Format Type - HDMI
Receiver/Transmitter Format Type - IR
Receiver/Transmitter Format Type - RS-232
Supported Resolution - 1080i (1920x1080)
Supported Resolution - 1080p (1920x1080)
Supported Resolution - Other
Warranty - Yes
Spec Sheet available - Yes
Certifications:
CE
Active Power:
6.10 Watt
Current Draw:
2.50 Amps
DC Voltage:
12 Volts
Depth:
3.95 in
Height:
1.02 in
Width:
3.95 in
Product Weight:
0.73 lbs
Warranty (Length/Type):
3 Years
Data Rate:
3.4 Gbps per color
Resolution:
All HDMI 1.4a resolutions supported
Equalization:
Adaptive, automatic
EDID support:
Transparent
HDCP pass through:
Yes
RS-232 pass through:
Yes
IR pass through:
Yes
Overall Signal Delay:
10µs (including 100m CATx cable)
