Rackmount Power Panel, 1U, 20A, 4-Step + 2-Remote Sequencer
Series: ACR-SEQ
Model: ACR-SEQ6-2009
Delay between sequenced steps (0.5-10 seconds) is screwdriver adjustable
Power rating of 120VAC, 60Hz/20A with EMI/RFI filtering. Each receptacle rated 15A.
Rear termination blocks accommodate remote switches, external triggers and an alarm system interface for use where mandated by fire code.
Includes two dry contact closures (steps 5 and 6) for triggering remote power control units (RPC series, order separately).
Actuation Switch: front panel rocker switch with momentary contacts (normally open SPST) plus rear barrier strip termination blocks for momentary (normally open) remote switches.
19”W rackmount panel with four step sequential power and nine outlets (six switched, three unswitched) for sequential activation/deactivation of connected equipment. Includes alarm interface.
Delay between sequenced steps (0.5-10 seconds) is screwdriver adjustable
Power rating of 120VAC, 60Hz/20A with EMI/RFI filtering. Each receptacle rated 15A.
Rear termination blocks accommodate remote switches, external triggers and an alarm system interface for use where mandated by fire code.
Includes two dry contact closures (steps 5 and 6) for triggering remote power control units (RPC series, order separately).
Actuation Switch: front panel rocker switch with momentary contacts (normally open SPST) plus rear barrier strip termination blocks for momentary (normally open) remote switches.
Alarm Interface: lock on, lock off and switch lock functions for alarm system or master control panel applications.
External Control Connections: plug-in barrier strip terminal blocks
EMI/RFI Filter: 19dB@500kHz, 42dB@30MHz
Termination via 9 ft. attached cord with NEMA 5-20P plug.
Dimensions: 19"W x 1.75"H (1U) x 9"D
Made in the U.S.A.
ETL-listed in the U.S. and Canada to UL Standard 60065
UL Rated - Yes
Warranty - Yes
Spec Sheet available - Yes
EMI/RFI Filter:
19dB at 500kHz, 42dB at 30MHz
UL Rated:
Yes
Rackmountable:
Yes
Number of Outlets:
9
Current Rating:
20 Amps
Regulatory Compliance:
ETL
AC Voltage:
120 Volts
Depth:
9 in
Height:
1.75 in
Width:
19 in
Number of Sequence Events:
6
Wireless:
No
Warranty (Length/Type):
Limited
ACR-2009
- Rackmount Power Panel, 1U, 20A, Fixed Cord
ACR-SEQ4-1509
- Rackmount Power Panel, 1U, 15A, 4-Step Sequencer
RPC-15
- Remote Power Control, 15A stand-alone unit with cord
RPC-20-CD
- Remote Power Control, 20A, stand-alone unit with cord
RPC-20-SCD
- Remote Power Control, 20A, stand-alone unit with cord, surge protection
RPC-3N1
- Low Voltage Surface-mount Remote Power Control
