HDMI-Full single-link HDMI - DVI HDCP production keys for HDMI output
HMDI 3D pattern testing - Testing per HDMI standard with 3D Bitmap Conversion Tool
Image Control Tool - Fine tune HDMI deep color images (882E only)
DTV ready - Pre-programmed standard DTV formats are ready for immediate use. Digital outputs support YCbCr color encoding. Analog outputs support tri-level composite sync and YPbPr
Built-in formats - Over 350 popular video formats are built-in including VESA, ATSC, EIA-770.x, SMPTE 170, 240, 259, 267, 274, 292, 293, 295, 296, Australian, EIA/CEA-861D, NTSC and PAL
The Teledyne LeCroy quantumdata 882EA-HDMI test instrument provides two (2) HDMI transmit (Output) ports and two (2) HDMI receive (Input) ports for testing both HDMI sources, sinks and repeater devices. The 882EA-HDMI instrument can optionally be equipped with the industry approved HDMI CEC and HDCP compliance test options as well.
HDMI-Full single-link HDMI - DVI HDCP production keys for HDMI output
HMDI 3D pattern testing - Testing per HDMI standard with 3D Bitmap Conversion Tool
Image Control Tool - Fine tune HDMI deep color images (882E only)
DTV ready - Pre-programmed standard DTV formats are ready for immediate use. Digital outputs support YCbCr color encoding. Analog outputs support tri-level composite sync and YPbPr
Built-in formats - Over 350 popular video formats are built-in including VESA, ATSC, EIA-770.x, SMPTE 170, 240, 259, 267, 274, 292, 293, 295, 296, Australian, EIA/CEA-861D, NTSC and PAL
Advanced E-EDID parsing - Provide decoded EDID in human readable text
Hot-plug format list - Configures list of formats in accordance with EDID of connected sink
Automatic and programmable HDMI InfoFrame setup
Audio testing - Internal sine wave generator, and external SPDIF audio input (HDMI). User defined sampling rates: 32, 44.1, 48, 88.2, 176.4 and 192kHz
HDMI EDID Compliance Test - Runs the HDMI compliance test on the EDID of the connected sink device
HDMI Active Format Descriptor (AFD) testing - Ability to run the active format descriptor test on a sink device under test
HDMI pixel repetition testing - Ability to run the pixel repetition test on a sink device under test
HDMI PacketTx test image & report - Enables you to view the data island and infoframe data transmitted from the HDMI transmitter to the HDMI sink under test
Aux Channel Analyzer (ACA) - Enables you to monitor the DDC channel for the HDCP authentication transactions and EDID exchanges and CEC messages on the CEC bus
Configure list of video formats based on EDID of connected HDMI sink following hot plug
HDCP testing - Run basic HDCP functional tests on HDMI sink devices
EDID testing - Run basic EDID functional tests on HDMI sink devices
Source video testing - Run basic video tests on HDMI source devices to verify video timing and video parameters
Source EDID testing - Run basic functional tests on HDMI source devices, emulate a variety of EDIDs to test a source’s response
EDID Editor - Modify EDIDs or create your own custom EDIDs
Local pattern storage - Store multiple custom images (.bmp, .jpg, and .png) images in instrument
Probe Trigger - Trigger a scope or inspection camera using the probe signal. Position a pulse anywhere in the frame
Central administration - Update and configure all networked instruments from a single computer
Network control - Fully control instrument from any network location with web browser or Telnet client
Graphics SDK - Create complex patterns based on your specifications using C++ software development kit
Easy to use - Access powerful features easily using intuitive user interface
Multiple configurations - Save and restore different instrument configurations for different applications
PC Card-Clone one generator to another using a standard CompactFlash card